FHIR Osiris Implementation Guide
2.1.0 - ci-build

FHIR Osiris Implementation Guide - Local Development build (v2.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: AnnotationReference - Detailed Descriptions

Draft as of 2024-03-21

Definitions for the annotation-reference resource profile.

Guidance on how to interpret the contents of this table can be found here

0. MolecularSequence
2. MolecularSequence.coordinateSystem
Pattern Value0
4. MolecularSequence.patient
TypeReference(Oncology Patient)
Must Supporttrue
6. MolecularSequence.referenceSeq
8. MolecularSequence.referenceSeq.orientation
Definition

Strand orientation of the annotation DNA

ShortDNA strand orientation
Must Supporttrue
10. MolecularSequence.referenceSeq.referenceSeqId
Definition

Type of the annotation referenced to describe the molecular entity

ShortType of the referenced annotation
Control1..?
BindingUnless not suitable, these codes SHALL be taken from Reference Type Value Set
(extensible to https://build.fhir.org/ig/arkhn/arkhn-ig-osiris/ValueSet/ReferenceType)
Must Supporttrue
12. MolecularSequence.repository
Control1..?
SlicingThis element introduces a set of slices on MolecularSequence.repository. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
  • 14. MolecularSequence.repository:reference-db
    Slice Namereference-db
    Control1..1
    16. MolecularSequence.repository:reference-db.type
    Pattern Valueother
    18. MolecularSequence.repository:reference-db.name
    Definition

    Reference database name

    ShortReference database name
    Control1..?
    Must Supporttrue
    20. MolecularSequence.repository:reference-db.datasetId
    Definition

    Identifier of the annotation in the database

    ShortIdentifier of the annotation in the database
    Control1..?
    Must Supporttrue
    22. MolecularSequence.repository:pfam-domain
    Slice Namepfam-domain
    Control0..1
    Must Supporttrue
    24. MolecularSequence.repository:pfam-domain.type
    Pattern Valuedirectlink
    26. MolecularSequence.repository:pfam-domain.url
    Pattern Valuehttp://pfam.xfam.org/
    28. MolecularSequence.repository:pfam-domain.name
    Pattern Valuepfam
    30. MolecularSequence.repository:pfam-domain.datasetId
    Definition

    Identifier in the database of protein families and protein domains (Pfam) containing the genetic alteration.

    ShortPfam ID
    Must Supporttrue
    32. MolecularSequence.repository:pfam-domain.readsetId
    Definition

    Name of the protein domain in the Pfam database containing the genetic alteration.

    ShortPfam domain name
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. MolecularSequence
    Definition

    Raw data describing a biological sequence.

    ShortInformation about a biological sequence
    Control0..*
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    msq-3: Only 0 and 1 are valid for coordinateSystem (coordinateSystem = 1 or coordinateSystem = 0)
    2. MolecularSequence.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    This element is affected by the following invariants: ele-1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. MolecularSequence.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Standards StatusNormative (from Trial Use)
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on MolecularSequence.modifierExtension. The slices are unordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. MolecularSequence.coordinateSystem
      Definition

      Whether the sequence is numbered starting at 0 (0-based numbering or coordinates, inclusive start, exclusive end) or starting at 1 (1-based numbering, inclusive start and inclusive end).

      ShortBase number of coordinate system (0 for 0-based numbering or coordinates, inclusive start, exclusive end, 1 for 1-based numbering, inclusive start, inclusive end)
      Comments

      32 bit number; for values larger than this, use decimal

      Control1..1
      This element is affected by the following invariants: ele-1
      Typeinteger
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Pattern Value0
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. MolecularSequence.patient
      Definition

      The patient whose sequencing results are described by this resource.

      ShortWho and/or what this is about
      Comments

      References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

      Control0..1
      This element is affected by the following invariants: ele-1
      TypeReference(Oncology Patient, Patient)
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
      10. MolecularSequence.referenceSeq
      Definition

      A sequence that is used as a reference to describe variants that are present in a sequence analyzed.

      ShortA sequence used as reference
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      msq-6: Have and only have one of the following elements in referenceSeq : 1. genomeBuild ; 2 referenceSeqId; 3. referenceSeqPointer; 4. referenceSeqString; ((genomeBuild.count()+referenceSeqId.count()+ referenceSeqPointer.count()+ referenceSeqString.count()) = 1)
      msq-5: GenomeBuild and chromosome must be both contained if either one of them is contained ((chromosome.empty() and genomeBuild.empty()) or (chromosome.exists() and genomeBuild.exists()))
      12. MolecularSequence.referenceSeq.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      14. MolecularSequence.referenceSeq.orientation
      Definition

      Strand orientation of the annotation DNA


      A relative reference to a DNA strand based on gene orientation. The strand that contains the open reading frame of the gene is the "sense" strand, and the opposite complementary strand is the "antisense" strand.

      ShortDNA strand orientationsense | antisense
      Comments

      Note that FHIR strings SHALL NOT exceed 1MB in size

      Control0..1
      This element is affected by the following invariants: ele-1
      BindingThe codes SHALL be taken from orientationTypehttp://hl7.org/fhir/ValueSet/orientation-type|4.0.1
      (required to http://hl7.org/fhir/ValueSet/orientation-type|4.0.1)

      Type for orientation.

      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. MolecularSequence.referenceSeq.referenceSeqId
      Definition

      Type of the annotation referenced to describe the molecular entity


      Reference identifier of reference sequence submitted to NCBI. It must match the type in the MolecularSequence.type field. For example, the prefix, “NG_” identifies reference sequence for genes, “NM_” for messenger RNA transcripts, and “NP_” for amino acid sequences.

      ShortType of the referenced annotationReference identifier
      Comments

      Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

      Control10..1
      This element is affected by the following invariants: ele-1
      BindingUnless not suitable, these codes SHALL be taken from For example codes, see Reference Type Value Sethttp://hl7.org/fhir/ValueSet/sequence-referenceSeq
      (extensible to https://build.fhir.org/ig/arkhn/arkhn-ig-osiris/ValueSet/ReferenceType)
      TypeCodeableConcept
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. MolecularSequence.repository
      Definition

      Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

      ShortExternal repository which contains detailed report related with observedSeq in this resource
      Control10..*
      This element is affected by the following invariants: ele-1
      TypeBackboneElement
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on MolecularSequence.repository. The slices are unordered and Open, and can be differentiated using the following discriminators:
      • pattern @ type
      • 20. MolecularSequence.repository.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. MolecularSequence.repository.type
        Definition

        Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

        Shortdirectlink | openapi | login | oauth | other
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control1..1
        This element is affected by the following invariants: ele-1
        BindingThe codes SHALL be taken from repositoryTypehttp://hl7.org/fhir/ValueSet/repository-type|4.0.1
        (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

        Type for access of external URI.

        Typecode
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. MolecularSequence.repository:reference-db
        Slice Namereference-db
        Definition

        Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

        ShortExternal repository which contains detailed report related with observedSeq in this resource
        Control10..1*
        This element is affected by the following invariants: ele-1
        TypeBackboneElement
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. MolecularSequence.repository:reference-db.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. MolecularSequence.repository:reference-db.type
        Definition

        Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

        Shortdirectlink | openapi | login | oauth | other
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control1..1
        This element is affected by the following invariants: ele-1
        BindingThe codes SHALL be taken from repositoryTypehttp://hl7.org/fhir/ValueSet/repository-type|4.0.1
        (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

        Type for access of external URI.

        Typecode
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Pattern Valueother
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. MolecularSequence.repository:reference-db.name
        Definition

        Reference database name


        URI of an external repository which contains further details about the genetics data.

        ShortReference database nameRepository's name
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control10..1
        This element is affected by the following invariants: ele-1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. MolecularSequence.repository:reference-db.datasetId
        Definition

        Identifier of the annotation in the database


        Id of the variant in this external repository. The server will understand how to use this id to call for more info about datasets in external repository.

        ShortIdentifier of the annotation in the databaseId of the dataset that used to call for dataset in repository
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control10..1
        This element is affected by the following invariants: ele-1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. MolecularSequence.repository:pfam-domain
        Slice Namepfam-domain
        Definition

        Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

        ShortExternal repository which contains detailed report related with observedSeq in this resource
        Control0..1*
        This element is affected by the following invariants: ele-1
        TypeBackboneElement
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. MolecularSequence.repository:pfam-domain.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        38. MolecularSequence.repository:pfam-domain.type
        Definition

        Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

        Shortdirectlink | openapi | login | oauth | other
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control1..1
        This element is affected by the following invariants: ele-1
        BindingThe codes SHALL be taken from repositoryTypehttp://hl7.org/fhir/ValueSet/repository-type|4.0.1
        (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

        Type for access of external URI.

        Typecode
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Pattern Valuedirectlink
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. MolecularSequence.repository:pfam-domain.url
        Definition

        URI of an external repository which contains further details about the genetics data.

        ShortURI of the repository
        Comments

        see http://en.wikipedia.org/wiki/Uniform_resource_identifier

        Control0..1
        This element is affected by the following invariants: ele-1
        Typeuri
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Pattern Valuehttp://pfam.xfam.org/
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. MolecularSequence.repository:pfam-domain.name
        Definition

        URI of an external repository which contains further details about the genetics data.

        ShortRepository's name
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control0..1
        This element is affected by the following invariants: ele-1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Pattern Valuepfam
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. MolecularSequence.repository:pfam-domain.datasetId
        Definition

        Identifier in the database of protein families and protein domains (Pfam) containing the genetic alteration.


        Id of the variant in this external repository. The server will understand how to use this id to call for more info about datasets in external repository.

        ShortPfam IDId of the dataset that used to call for dataset in repository
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control0..1
        This element is affected by the following invariants: ele-1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. MolecularSequence.repository:pfam-domain.readsetId
        Definition

        Name of the protein domain in the Pfam database containing the genetic alteration.


        Id of the read in this external repository.

        ShortPfam domain nameId of the read
        Comments

        Note that FHIR strings SHALL NOT exceed 1MB in size

        Control0..1
        This element is affected by the following invariants: ele-1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be found here

        0. MolecularSequence
        Definition

        Raw data describing a biological sequence.

        ShortInformation about a biological sequence
        Control0..*
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        msq-3: Only 0 and 1 are valid for coordinateSystem (coordinateSystem = 1 or coordinateSystem = 0)
        2. MolecularSequence.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Summarytrue
        4. MolecularSequence.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeMeta
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. MolecularSequence.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        This element is affected by the following invariants: ele-1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. MolecularSequence.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        This element is affected by the following invariants: ele-1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. MolecularSequence.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeNarrative
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. MolecularSequence.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Alternate Namesinline resources, anonymous resources, contained resources
        14. MolecularSequence.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension
        Standards StatusNormative (from Trial Use)
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on MolecularSequence.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. MolecularSequence.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Standards StatusNormative (from Trial Use)
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on MolecularSequence.modifierExtension. The slices are unordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 18. MolecularSequence.identifier
            Definition

            A unique identifier for this particular sequence instance. This is a FHIR-defined id.

            ShortUnique ID for this particular sequence. This is a FHIR-defined id
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            This element is affected by the following invariants: ele-1
            TypeIdentifier
            Summarytrue
            Requirements

            Allows sequences to be distinguished and referenced.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            20. MolecularSequence.type
            Definition

            Amino Acid Sequence/ DNA Sequence / RNA Sequence.

            Shortaa | dna | rna
            Comments

            Note that FHIR strings SHALL NOT exceed 1MB in size

            Control0..1
            This element is affected by the following invariants: ele-1
            BindingThe codes SHALL be taken from sequenceType
            (required to http://hl7.org/fhir/ValueSet/sequence-type|4.0.1)

            Type if a sequence -- DNA, RNA, or amino acid sequence.

            Typecode
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. MolecularSequence.coordinateSystem
            Definition

            Whether the sequence is numbered starting at 0 (0-based numbering or coordinates, inclusive start, exclusive end) or starting at 1 (1-based numbering, inclusive start and inclusive end).

            ShortBase number of coordinate system (0 for 0-based numbering or coordinates, inclusive start, exclusive end, 1 for 1-based numbering, inclusive start, inclusive end)
            Comments

            32 bit number; for values larger than this, use decimal

            Control1..1
            This element is affected by the following invariants: ele-1
            Typeinteger
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Pattern Value0
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. MolecularSequence.patient
            Definition

            The patient whose sequencing results are described by this resource.

            ShortWho and/or what this is about
            Comments

            References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeReference(Oncology Patient)
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
            26. MolecularSequence.specimen
            Definition

            Specimen used for sequencing.

            ShortSpecimen used for sequencing
            Comments

            References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeReference(Specimen)
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
            28. MolecularSequence.device
            Definition

            The method for sequencing, for example, chip information.

            ShortThe method for sequencing
            Comments

            References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeReference(Device)
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
            30. MolecularSequence.performer
            Definition

            The organization or lab that should be responsible for this result.

            ShortWho should be responsible for test result
            Comments

            References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeReference(Organization)
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
            32. MolecularSequence.quantity
            Definition

            The number of copies of the sequence of interest. (RNASeq).

            ShortThe number of copies of the sequence of interest. (RNASeq)
            Comments

            The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

            Control0..1
            This element is affected by the following invariants: ele-1
            TypeQuantity
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            qty-3: If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
            34. MolecularSequence.referenceSeq
            Definition

            A sequence that is used as a reference to describe variants that are present in a sequence analyzed.

            ShortA sequence used as reference
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeBackboneElement
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            msq-6: Have and only have one of the following elements in referenceSeq : 1. genomeBuild ; 2 referenceSeqId; 3. referenceSeqPointer; 4. referenceSeqString; ((genomeBuild.count()+referenceSeqId.count()+ referenceSeqPointer.count()+ referenceSeqString.count()) = 1)
            msq-5: GenomeBuild and chromosome must be both contained if either one of them is contained ((chromosome.empty() and genomeBuild.empty()) or (chromosome.exists() and genomeBuild.exists()))
            36. MolecularSequence.referenceSeq.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            XML FormatIn the XML format, this property is represented as an attribute.
            38. MolecularSequence.referenceSeq.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension
            Standards StatusNormative (from Trial Use)
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on MolecularSequence.referenceSeq.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 40. MolecularSequence.referenceSeq.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              This element is affected by the following invariants: ele-1
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              42. MolecularSequence.referenceSeq.chromosome
              Definition

              Structural unit composed of a nucleic acid molecule which controls its own replication through the interaction of specific proteins at one or more origins of replication (SO:0000340).

              ShortChromosome containing genetic finding
              Comments

              Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

              Control0..1
              This element is affected by the following invariants: ele-1
              BindingFor example codes, see chromosome-human
              (example to http://hl7.org/fhir/ValueSet/chromosome-human)

              Chromosome number for human.

              TypeCodeableConcept
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. MolecularSequence.referenceSeq.genomeBuild
              Definition

              The Genome Build used for reference, following GRCh build versions e.g. 'GRCh 37'. Version number must be included if a versioned release of a primary build was used.

              ShortThe Genome Build used for reference, following GRCh build versions e.g. 'GRCh 37'
              Comments

              Note that FHIR strings SHALL NOT exceed 1MB in size

              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. MolecularSequence.referenceSeq.orientation
              Definition

              Strand orientation of the annotation DNA

              ShortDNA strand orientation
              Comments

              Note that FHIR strings SHALL NOT exceed 1MB in size

              Control0..1
              This element is affected by the following invariants: ele-1
              BindingThe codes SHALL be taken from orientationType
              (required to http://hl7.org/fhir/ValueSet/orientation-type|4.0.1)

              Type for orientation.

              Typecode
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. MolecularSequence.referenceSeq.referenceSeqId
              Definition

              Type of the annotation referenced to describe the molecular entity

              ShortType of the referenced annotation
              Comments

              Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

              Control1..1
              This element is affected by the following invariants: ele-1
              BindingUnless not suitable, these codes SHALL be taken from Reference Type Value Set
              (extensible to https://build.fhir.org/ig/arkhn/arkhn-ig-osiris/ValueSet/ReferenceType)
              TypeCodeableConcept
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. MolecularSequence.referenceSeq.referenceSeqPointer
              Definition

              A pointer to another MolecularSequence entity as reference sequence.

              ShortA pointer to another MolecularSequence entity as reference sequence
              Comments

              References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

              Control0..1
              This element is affected by the following invariants: ele-1
              TypeReference(MolecularSequence)
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
              52. MolecularSequence.referenceSeq.referenceSeqString
              Definition

              A string like "ACGT".

              ShortA string to represent reference sequence
              Comments

              Note that FHIR strings SHALL NOT exceed 1MB in size

              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. MolecularSequence.referenceSeq.strand
              Definition

              An absolute reference to a strand. The Watson strand is the strand whose 5'-end is on the short arm of the chromosome, and the Crick strand as the one whose 5'-end is on the long arm.

              Shortwatson | crick
              Comments

              Note that FHIR strings SHALL NOT exceed 1MB in size

              Control0..1
              This element is affected by the following invariants: ele-1
              BindingThe codes SHALL be taken from strandType
              (required to http://hl7.org/fhir/ValueSet/strand-type|4.0.1)

              Type for strand.

              Typecode
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. MolecularSequence.referenceSeq.windowStart
              Definition

              Start position of the window on the reference sequence. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

              ShortStart position of the window on the reference sequence
              Comments

              32 bit number; for values larger than this, use decimal

              Control0..1
              This element is affected by the following invariants: ele-1
              Typeinteger
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. MolecularSequence.referenceSeq.windowEnd
              Definition

              End position of the window on the reference sequence. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

              ShortEnd position of the window on the reference sequence
              Comments

              32 bit number; for values larger than this, use decimal

              Control0..1
              This element is affected by the following invariants: ele-1
              Typeinteger
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. MolecularSequence.variant
              Definition

              The definition of variant here originates from Sequence ontology (variant_of). This element can represent amino acid or nucleic sequence change(including insertion,deletion,SNP,etc.) It can represent some complex mutation or segment variation with the assist of CIGAR string.

              ShortVariant in sequence
              Control0..*
              This element is affected by the following invariants: ele-1
              TypeBackboneElement
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. MolecularSequence.variant.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              XML FormatIn the XML format, this property is represented as an attribute.
              64. MolecularSequence.variant.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              This element is affected by the following invariants: ele-1
              TypeExtension
              Standards StatusNormative (from Trial Use)
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on MolecularSequence.variant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 66. MolecularSequence.variant.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                68. MolecularSequence.variant.start
                Definition

                Start position of the variant on the reference sequence. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

                ShortStart position of the variant on the reference sequence
                Comments

                32 bit number; for values larger than this, use decimal

                Control0..1
                This element is affected by the following invariants: ele-1
                Typeinteger
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                70. MolecularSequence.variant.end
                Definition

                End position of the variant on the reference sequence. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

                ShortEnd position of the variant on the reference sequence
                Comments

                32 bit number; for values larger than this, use decimal

                Control0..1
                This element is affected by the following invariants: ele-1
                Typeinteger
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                72. MolecularSequence.variant.observedAllele
                Definition

                An allele is one of a set of coexisting sequence variants of a gene (SO:0001023). Nucleotide(s)/amino acids from start position of sequence to stop position of sequence on the positive (+) strand of the observed sequence. When the sequence type is DNA, it should be the sequence on the positive (+) strand. This will lay in the range between variant.start and variant.end.

                ShortAllele that was observed
                Comments

                Note that FHIR strings SHALL NOT exceed 1MB in size

                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                74. MolecularSequence.variant.referenceAllele
                Definition

                An allele is one of a set of coexisting sequence variants of a gene (SO:0001023). Nucleotide(s)/amino acids from start position of sequence to stop position of sequence on the positive (+) strand of the reference sequence. When the sequence type is DNA, it should be the sequence on the positive (+) strand. This will lay in the range between variant.start and variant.end.

                ShortAllele in the reference sequence
                Comments

                Note that FHIR strings SHALL NOT exceed 1MB in size

                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                76. MolecularSequence.variant.cigar
                Definition

                Extended CIGAR string for aligning the sequence with reference bases. See detailed documentation here.

                ShortExtended CIGAR string for aligning the sequence with reference bases
                Comments

                Note that FHIR strings SHALL NOT exceed 1MB in size

                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                78. MolecularSequence.variant.variantPointer
                Definition

                A pointer to an Observation containing variant information.

                ShortPointer to observed variant information
                Comments

                References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

                Control0..1
                This element is affected by the following invariants: ele-1
                TypeReference(Observation)
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
                80. MolecularSequence.observedSeq
                Definition

                Sequence that was observed. It is the result marked by referenceSeq along with variant records on referenceSeq. This shall start from referenceSeq.windowStart and end by referenceSeq.windowEnd.

                ShortSequence that was observed
                Comments

                Note that FHIR strings SHALL NOT exceed 1MB in size

                Control0..1
                This element is affected by the following invariants: ele-1
                Typestring
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                82. MolecularSequence.quality
                Definition

                An experimental feature attribute that defines the quality of the feature in a quantitative way, such as a phred quality score (SO:0001686).

                ShortAn set of value as quality of sequence
                Control0..*
                This element is affected by the following invariants: ele-1
                TypeBackboneElement
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                84. MolecularSequence.quality.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                XML FormatIn the XML format, this property is represented as an attribute.
                86. MolecularSequence.quality.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                This element is affected by the following invariants: ele-1
                TypeExtension
                Standards StatusNormative (from Trial Use)
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on MolecularSequence.quality.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 88. MolecularSequence.quality.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  This element is affected by the following invariants: ele-1
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  90. MolecularSequence.quality.type
                  Definition

                  INDEL / SNP / Undefined variant.

                  Shortindel | snp | unknown
                  Comments

                  Note that FHIR strings SHALL NOT exceed 1MB in size

                  Control1..1
                  This element is affected by the following invariants: ele-1
                  BindingThe codes SHALL be taken from qualityType
                  (required to http://hl7.org/fhir/ValueSet/quality-type|4.0.1)

                  Type for quality report.

                  Typecode
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  92. MolecularSequence.quality.standardSequence
                  Definition

                  Gold standard sequence used for comparing against.

                  ShortStandard sequence for comparison
                  Comments

                  Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  BindingFor example codes, see FDA-StandardSequence
                  (example to http://hl7.org/fhir/ValueSet/sequence-quality-standardSequence)

                  Reference identifier of the sequence that used to mark the quality of tested samples.

                  TypeCodeableConcept
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  94. MolecularSequence.quality.start
                  Definition

                  Start position of the sequence. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

                  ShortStart position of the sequence
                  Comments

                  32 bit number; for values larger than this, use decimal

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typeinteger
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  96. MolecularSequence.quality.end
                  Definition

                  End position of the sequence. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

                  ShortEnd position of the sequence
                  Comments

                  32 bit number; for values larger than this, use decimal

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typeinteger
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  98. MolecularSequence.quality.score
                  Definition

                  The score of an experimentally derived feature such as a p-value (SO:0001685).

                  ShortQuality score for the comparison
                  Comments

                  The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeQuantity
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  qty-3: If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
                  100. MolecularSequence.quality.method
                  Definition

                  Which method is used to get sequence quality.

                  ShortMethod to get quality
                  Comments

                  Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  BindingFor example codes, see FDA-Method
                  (example to http://hl7.org/fhir/ValueSet/sequence-quality-method)

                  The method used to evaluate the numerical quality of the observed sequence.

                  TypeCodeableConcept
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  102. MolecularSequence.quality.truthTP
                  Definition

                  True positives, from the perspective of the truth data, i.e. the number of sites in the Truth Call Set for which there are paths through the Query Call Set that are consistent with all of the alleles at this site, and for which there is an accurate genotype call for the event.

                  ShortTrue positives from the perspective of the truth data
                  Comments

                  Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typedecimal
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  104. MolecularSequence.quality.queryTP
                  Definition

                  True positives, from the perspective of the query data, i.e. the number of sites in the Query Call Set for which there are paths through the Truth Call Set that are consistent with all of the alleles at this site, and for which there is an accurate genotype call for the event.

                  ShortTrue positives from the perspective of the query data
                  Comments

                  Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typedecimal
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  106. MolecularSequence.quality.truthFN
                  Definition

                  False negatives, i.e. the number of sites in the Truth Call Set for which there is no path through the Query Call Set that is consistent with all of the alleles at this site, or sites for which there is an inaccurate genotype call for the event. Sites with correct variant but incorrect genotype are counted here.

                  ShortFalse negatives
                  Comments

                  Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typedecimal
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  108. MolecularSequence.quality.queryFP
                  Definition

                  False positives, i.e. the number of sites in the Query Call Set for which there is no path through the Truth Call Set that is consistent with this site. Sites with correct variant but incorrect genotype are counted here.

                  ShortFalse positives
                  Comments

                  Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typedecimal
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  110. MolecularSequence.quality.gtFP
                  Definition

                  The number of false positives where the non-REF alleles in the Truth and Query Call Sets match (i.e. cases where the truth is 1/1 and the query is 0/1 or similar).

                  ShortFalse positives where the non-REF alleles in the Truth and Query Call Sets match
                  Comments

                  Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typedecimal
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  112. MolecularSequence.quality.precision
                  Definition

                  QUERY.TP / (QUERY.TP + QUERY.FP).

                  ShortPrecision of comparison
                  Comments

                  Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typedecimal
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  114. MolecularSequence.quality.recall
                  Definition

                  TRUTH.TP / (TRUTH.TP + TRUTH.FN).

                  ShortRecall of comparison
                  Comments

                  Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typedecimal
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  116. MolecularSequence.quality.fScore
                  Definition

                  Harmonic mean of Recall and Precision, computed as: 2 * precision * recall / (precision + recall).

                  ShortF-score
                  Comments

                  Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typedecimal
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  118. MolecularSequence.quality.roc
                  Definition

                  Receiver Operator Characteristic (ROC) Curve to give sensitivity/specificity tradeoff.

                  ShortReceiver Operator Characteristic (ROC) Curve
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeBackboneElement
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  120. MolecularSequence.quality.roc.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  XML FormatIn the XML format, this property is represented as an attribute.
                  122. MolecularSequence.quality.roc.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  This element is affected by the following invariants: ele-1
                  TypeExtension
                  Standards StatusNormative (from Trial Use)
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on MolecularSequence.quality.roc.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 124. MolecularSequence.quality.roc.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    126. MolecularSequence.quality.roc.score
                    Definition

                    Invidual data point representing the GQ (genotype quality) score threshold.

                    ShortGenotype quality score
                    Comments

                    32 bit number; for values larger than this, use decimal

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    Typeinteger
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    128. MolecularSequence.quality.roc.numTP
                    Definition

                    The number of true positives if the GQ score threshold was set to "score" field value.

                    ShortRoc score true positive numbers
                    Comments

                    32 bit number; for values larger than this, use decimal

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    Typeinteger
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    130. MolecularSequence.quality.roc.numFP
                    Definition

                    The number of false positives if the GQ score threshold was set to "score" field value.

                    ShortRoc score false positive numbers
                    Comments

                    32 bit number; for values larger than this, use decimal

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    Typeinteger
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    132. MolecularSequence.quality.roc.numFN
                    Definition

                    The number of false negatives if the GQ score threshold was set to "score" field value.

                    ShortRoc score false negative numbers
                    Comments

                    32 bit number; for values larger than this, use decimal

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    Typeinteger
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    134. MolecularSequence.quality.roc.precision
                    Definition

                    Calculated precision if the GQ score threshold was set to "score" field value.

                    ShortPrecision of the GQ score
                    Comments

                    Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    Typedecimal
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    136. MolecularSequence.quality.roc.sensitivity
                    Definition

                    Calculated sensitivity if the GQ score threshold was set to "score" field value.

                    ShortSensitivity of the GQ score
                    Comments

                    Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    Typedecimal
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    138. MolecularSequence.quality.roc.fMeasure
                    Definition

                    Calculated fScore if the GQ score threshold was set to "score" field value.

                    ShortFScore of the GQ score
                    Comments

                    Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)

                    Control0..*
                    This element is affected by the following invariants: ele-1
                    Typedecimal
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    140. MolecularSequence.readCoverage
                    Definition

                    Coverage (read depth or depth) is the average number of reads representing a given nucleotide in the reconstructed sequence.

                    ShortAverage number of reads representing a given nucleotide in the reconstructed sequence
                    Comments

                    32 bit number; for values larger than this, use decimal

                    Control0..1
                    This element is affected by the following invariants: ele-1
                    Typeinteger
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    142. MolecularSequence.repository
                    Definition

                    Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

                    ShortExternal repository which contains detailed report related with observedSeq in this resource
                    Control1..*
                    This element is affected by the following invariants: ele-1
                    TypeBackboneElement
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on MolecularSequence.repository. The slices are unordered and Open, and can be differentiated using the following discriminators:
                    • pattern @ type
                    • 144. MolecularSequence.repository.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      XML FormatIn the XML format, this property is represented as an attribute.
                      146. MolecularSequence.repository.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      This element is affected by the following invariants: ele-1
                      TypeExtension
                      Standards StatusNormative (from Trial Use)
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on MolecularSequence.repository.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 148. MolecularSequence.repository.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        150. MolecularSequence.repository.type
                        Definition

                        Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

                        Shortdirectlink | openapi | login | oauth | other
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control1..1
                        This element is affected by the following invariants: ele-1
                        BindingThe codes SHALL be taken from repositoryType
                        (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

                        Type for access of external URI.

                        Typecode
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        152. MolecularSequence.repository.url
                        Definition

                        URI of an external repository which contains further details about the genetics data.

                        ShortURI of the repository
                        Comments

                        see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typeuri
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        154. MolecularSequence.repository.name
                        Definition

                        URI of an external repository which contains further details about the genetics data.

                        ShortRepository's name
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        156. MolecularSequence.repository.datasetId
                        Definition

                        Id of the variant in this external repository. The server will understand how to use this id to call for more info about datasets in external repository.

                        ShortId of the dataset that used to call for dataset in repository
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        158. MolecularSequence.repository.variantsetId
                        Definition

                        Id of the variantset in this external repository. The server will understand how to use this id to call for more info about variantsets in external repository.

                        ShortId of the variantset that used to call for variantset in repository
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        160. MolecularSequence.repository.readsetId
                        Definition

                        Id of the read in this external repository.

                        ShortId of the read
                        Comments

                        Note that FHIR strings SHALL NOT exceed 1MB in size

                        Control0..1
                        This element is affected by the following invariants: ele-1
                        Typestring
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        162. MolecularSequence.repository:reference-db
                        Slice Namereference-db
                        Definition

                        Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

                        ShortExternal repository which contains detailed report related with observedSeq in this resource
                        Control1..1
                        This element is affected by the following invariants: ele-1
                        TypeBackboneElement
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        164. MolecularSequence.repository:reference-db.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        XML FormatIn the XML format, this property is represented as an attribute.
                        166. MolecularSequence.repository:reference-db.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        This element is affected by the following invariants: ele-1
                        TypeExtension
                        Standards StatusNormative (from Trial Use)
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on MolecularSequence.repository.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 168. MolecularSequence.repository:reference-db.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          This element is affected by the following invariants: ele-1
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          170. MolecularSequence.repository:reference-db.type
                          Definition

                          Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

                          Shortdirectlink | openapi | login | oauth | other
                          Comments

                          Note that FHIR strings SHALL NOT exceed 1MB in size

                          Control1..1
                          This element is affected by the following invariants: ele-1
                          BindingThe codes SHALL be taken from repositoryType
                          (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

                          Type for access of external URI.

                          Typecode
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Pattern Valueother
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          172. MolecularSequence.repository:reference-db.url
                          Definition

                          URI of an external repository which contains further details about the genetics data.

                          ShortURI of the repository
                          Comments

                          see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typeuri
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          174. MolecularSequence.repository:reference-db.name
                          Definition

                          Reference database name

                          ShortReference database name
                          Comments

                          Note that FHIR strings SHALL NOT exceed 1MB in size

                          Control1..1
                          This element is affected by the following invariants: ele-1
                          Typestring
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          176. MolecularSequence.repository:reference-db.datasetId
                          Definition

                          Identifier of the annotation in the database

                          ShortIdentifier of the annotation in the database
                          Comments

                          Note that FHIR strings SHALL NOT exceed 1MB in size

                          Control1..1
                          This element is affected by the following invariants: ele-1
                          Typestring
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          178. MolecularSequence.repository:reference-db.variantsetId
                          Definition

                          Id of the variantset in this external repository. The server will understand how to use this id to call for more info about variantsets in external repository.

                          ShortId of the variantset that used to call for variantset in repository
                          Comments

                          Note that FHIR strings SHALL NOT exceed 1MB in size

                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typestring
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          180. MolecularSequence.repository:reference-db.readsetId
                          Definition

                          Id of the read in this external repository.

                          ShortId of the read
                          Comments

                          Note that FHIR strings SHALL NOT exceed 1MB in size

                          Control0..1
                          This element is affected by the following invariants: ele-1
                          Typestring
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          182. MolecularSequence.repository:pfam-domain
                          Slice Namepfam-domain
                          Definition

                          Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

                          ShortExternal repository which contains detailed report related with observedSeq in this resource
                          Control0..1
                          This element is affected by the following invariants: ele-1
                          TypeBackboneElement
                          Must Supporttrue
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          184. MolecularSequence.repository:pfam-domain.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          XML FormatIn the XML format, this property is represented as an attribute.
                          186. MolecularSequence.repository:pfam-domain.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          This element is affected by the following invariants: ele-1
                          TypeExtension
                          Standards StatusNormative (from Trial Use)
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on MolecularSequence.repository.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 188. MolecularSequence.repository:pfam-domain.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            This element is affected by the following invariants: ele-1
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            190. MolecularSequence.repository:pfam-domain.type
                            Definition

                            Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

                            Shortdirectlink | openapi | login | oauth | other
                            Comments

                            Note that FHIR strings SHALL NOT exceed 1MB in size

                            Control1..1
                            This element is affected by the following invariants: ele-1
                            BindingThe codes SHALL be taken from repositoryType
                            (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

                            Type for access of external URI.

                            Typecode
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Pattern Valuedirectlink
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            192. MolecularSequence.repository:pfam-domain.url
                            Definition

                            URI of an external repository which contains further details about the genetics data.

                            ShortURI of the repository
                            Comments

                            see http://en.wikipedia.org/wiki/Uniform_resource_identifier

                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typeuri
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Pattern Valuehttp://pfam.xfam.org/
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            194. MolecularSequence.repository:pfam-domain.name
                            Definition

                            URI of an external repository which contains further details about the genetics data.

                            ShortRepository's name
                            Comments

                            Note that FHIR strings SHALL NOT exceed 1MB in size

                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Pattern Valuepfam
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            196. MolecularSequence.repository:pfam-domain.datasetId
                            Definition

                            Identifier in the database of protein families and protein domains (Pfam) containing the genetic alteration.

                            ShortPfam ID
                            Comments

                            Note that FHIR strings SHALL NOT exceed 1MB in size

                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            198. MolecularSequence.repository:pfam-domain.variantsetId
                            Definition

                            Id of the variantset in this external repository. The server will understand how to use this id to call for more info about variantsets in external repository.

                            ShortId of the variantset that used to call for variantset in repository
                            Comments

                            Note that FHIR strings SHALL NOT exceed 1MB in size

                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            200. MolecularSequence.repository:pfam-domain.readsetId
                            Definition

                            Name of the protein domain in the Pfam database containing the genetic alteration.

                            ShortPfam domain name
                            Comments

                            Note that FHIR strings SHALL NOT exceed 1MB in size

                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typestring
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            202. MolecularSequence.pointer
                            Definition

                            Pointer to next atomic sequence which at most contains one variant.

                            ShortPointer to next atomic sequence
                            Comments

                            References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.

                            Control0..*
                            This element is affected by the following invariants: ele-1
                            TypeReference(MolecularSequence)
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
                            204. MolecularSequence.structureVariant
                            Definition

                            Information about chromosome structure variation.

                            ShortStructural variant
                            Control0..*
                            This element is affected by the following invariants: ele-1
                            TypeBackboneElement
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            206. MolecularSequence.structureVariant.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            XML FormatIn the XML format, this property is represented as an attribute.
                            208. MolecularSequence.structureVariant.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            This element is affected by the following invariants: ele-1
                            TypeExtension
                            Standards StatusNormative (from Trial Use)
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on MolecularSequence.structureVariant.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 210. MolecularSequence.structureVariant.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored even if unrecognized
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              This element is affected by the following invariants: ele-1
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                              Summarytrue
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content, modifiers
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              212. MolecularSequence.structureVariant.variantType
                              Definition

                              Information about chromosome structure variation DNA change type.

                              ShortStructural variant change type
                              Comments

                              Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

                              Control0..1
                              This element is affected by the following invariants: ele-1
                              BindingThe codes SHALL be taken from LOINC Answer List LL379-9|4.0.1
                              (required to http://loinc.org/vs/LL379-9|4.0.1)

                              DNA change type.

                              TypeCodeableConcept
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              214. MolecularSequence.structureVariant.exact
                              Definition

                              Used to indicate if the outer and inner start-end values have the same meaning.

                              ShortDoes the structural variant have base pair resolution breakpoints?
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              Typeboolean
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              216. MolecularSequence.structureVariant.length
                              Definition

                              Length of the variant chromosome.

                              ShortStructural variant length
                              Comments

                              32 bit number; for values larger than this, use decimal

                              Control0..1
                              This element is affected by the following invariants: ele-1
                              Typeinteger
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              218. MolecularSequence.structureVariant.outer
                              Definition

                              Structural variant outer.

                              ShortStructural variant outer
                              Control0..1
                              This element is affected by the following invariants: ele-1
                              TypeBackboneElement
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              220. MolecularSequence.structureVariant.outer.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              XML FormatIn the XML format, this property is represented as an attribute.
                              222. MolecularSequence.structureVariant.outer.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              This element is affected by the following invariants: ele-1
                              TypeExtension
                              Standards StatusNormative (from Trial Use)
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on MolecularSequence.structureVariant.outer.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 224. MolecularSequence.structureVariant.outer.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                This element is affected by the following invariants: ele-1
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                226. MolecularSequence.structureVariant.outer.start
                                Definition

                                Structural variant outer start. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

                                ShortStructural variant outer start
                                Comments

                                32 bit number; for values larger than this, use decimal

                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typeinteger
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                228. MolecularSequence.structureVariant.outer.end
                                Definition

                                Structural variant outer end. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

                                ShortStructural variant outer end
                                Comments

                                32 bit number; for values larger than this, use decimal

                                Control0..1
                                This element is affected by the following invariants: ele-1
                                Typeinteger
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                230. MolecularSequence.structureVariant.inner
                                Definition

                                Structural variant inner.

                                ShortStructural variant inner
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                TypeBackboneElement
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                232. MolecularSequence.structureVariant.inner.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                XML FormatIn the XML format, this property is represented as an attribute.
                                234. MolecularSequence.structureVariant.inner.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                This element is affected by the following invariants: ele-1
                                TypeExtension
                                Standards StatusNormative (from Trial Use)
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on MolecularSequence.structureVariant.inner.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 236. MolecularSequence.structureVariant.inner.modifierExtension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                  ShortExtensions that cannot be ignored even if unrecognized
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  This element is affected by the following invariants: ele-1
                                  TypeExtension
                                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                  Summarytrue
                                  Requirements

                                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                  Alternate Namesextensions, user content, modifiers
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  238. MolecularSequence.structureVariant.inner.start
                                  Definition

                                  Structural variant inner start. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

                                  ShortStructural variant inner start
                                  Comments

                                  32 bit number; for values larger than this, use decimal

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  Typeinteger
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  240. MolecularSequence.structureVariant.inner.end
                                  Definition

                                  Structural variant inner end. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

                                  ShortStructural variant inner end
                                  Comments

                                  32 bit number; for values larger than this, use decimal

                                  Control0..1
                                  This element is affected by the following invariants: ele-1
                                  Typeinteger
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))